---
title: "Metal Weight Calculator: Steel & Aluminum Plate, Bar, Tube"
description: "Free metal weight calculator for steel, stainless, aluminum, copper, brass and titanium plate, bar and tube, in pounds or kilograms."
canonical: https://openspindle.com/tools/metal-weight-calculator
---

# Metal weight calculator

Weight of steel, stainless, aluminum, copper, brass and titanium plate, bar and tube, plus Delrin and UHMW, in pounds or kilograms. Pick a material and a shape and enter the size.

Metal weight is volume times density. The calculator works out the cross-section of the stock shape, multiplies by length to get volume, then by the material's density: in inches the answer is in pounds, in millimeters it is in kilograms.

It uses typical published densities. Real stock varies with alloy, temper and mill tolerance, so expect the actual weight to land within a few percent.

## Metal weight formulas by shape

Weight = cross-section area × length × density.

| Shape | Cross-section area | Inputs |
| --- | --- | --- |
| Plate or sheet | width × thickness | length, width, thickness |
| Flat bar | width × thickness | length, width, thickness |
| Round bar | π / 4 × diameter² | length, diameter |
| Round tube | π / 4 × (OD² − ID²), ID = OD − 2 × wall | length, outside diameter, wall |
| Square tube | width² − (width − 2 × wall)² | length, outside width, wall |

*Square tube ignores the corner radius, so it reads slightly heavy.*

## Density of common metals and plastics

| Material | Density (imperial) | Density (metric) |
| --- | --- | --- |
| Carbon steel (A36, 1018) | 0.2836 lb/in³ | 7.85 g/cm³ |
| Stainless steel (304, 316) | 0.289 lb/in³ | 8.0 g/cm³ |
| Aluminum 6061 | 0.0975 lb/in³ | 2.7 g/cm³ |
| Aluminum 5052 | 0.0968 lb/in³ | 2.68 g/cm³ |
| Aluminum 7075 | 0.101 lb/in³ | 2.81 g/cm³ |
| Copper (C110) | 0.323 lb/in³ | 8.94 g/cm³ |
| Brass (C360) | 0.307 lb/in³ | 8.5 g/cm³ |
| Titanium (Grade 5) | 0.16 lb/in³ | 4.43 g/cm³ |
| Delrin (acetal) | 0.051 lb/in³ | 1.41 g/cm³ |
| UHMW | 0.0339 lb/in³ | 0.94 g/cm³ |

*Typical published values. Alloys within a family vary slightly.*

## Steel and aluminum plate weight per square foot

Weight of one square foot (12 in × 12 in) of plate at common thicknesses.

| Thickness | Carbon steel | Stainless steel | Aluminum 6061 |
| --- | --- | --- | --- |
| 1/16 in | 2.55 lb | 2.60 lb | 0.88 lb |
| 1/8 in | 5.10 lb | 5.20 lb | 1.76 lb |
| 3/16 in | 7.66 lb | 7.80 lb | 2.63 lb |
| 1/4 in | 10.21 lb | 10.40 lb | 3.51 lb |
| 3/8 in | 15.31 lb | 15.61 lb | 5.27 lb |
| 1/2 in | 20.42 lb | 20.81 lb | 7.02 lb |
| 3/4 in | 30.63 lb | 31.21 lb | 10.53 lb |
| 1 in | 40.84 lb | 41.62 lb | 14.04 lb |

## Worked example

A 48 × 24 in plate, 1/4 in thick:

- Volume = 48 × 24 × 0.25 = 288 in³
- In carbon steel: 288 × 0.2836 = **81.7 lb** (37.0 kg)
- In aluminum 6061: 288 × 0.0975 = **28.1 lb** (12.7 kg)

Aluminum weighs about a third as much as steel for the same size, which is why it is the default for parts that get carried, flown or shipped often.

## Why weight matters when you buy parts

Raw material is priced by weight, so weight is the first number in a material cost estimate. It also sets freight: parts much past a few hundred pounds, or longer than about eight feet, usually ship LTL rather than parcel, which adds cost and a delivery appointment.

Need parts made from this stock? See [custom metal fabrication](/capabilities/metal-fabrication), [CNC machining services](/capabilities/cnc-machining) or [laser cutting services](/capabilities/laser-cutting).

## Processes that use this stock

Plate, bar and tube go here next.

- [Metal Fabrication](https://openspindle.com/capabilities/metal-fabrication.md)
- [CNC Machining](https://openspindle.com/capabilities/cnc-machining.md)
- [Laser Cutting](https://openspindle.com/capabilities/laser-cutting.md)
- [Waterjet Cutting](https://openspindle.com/capabilities/waterjet-cutting.md)

## More free tools and charts

- [Bend allowance calculator](https://openspindle.com/tools/bend-allowance-calculator.md): Bend allowance, bend deduction and K-factor.
- [Sheet metal gauge chart](https://openspindle.com/reference/sheet-metal-gauge-chart.md): Gauge to thickness for steel, stainless and aluminum.
- [Metal properties comparison](https://openspindle.com/reference/metal-properties-comparison.md): Strength, density and cost of common metals.

## Frequently asked questions

### How do you calculate the weight of a steel plate?

Multiply length × width × thickness to get volume, then multiply by the density of steel, about 0.2836 lb per cubic inch. A 12 × 12 × 1 in steel plate is 144 in³ × 0.2836 = about 40.8 lb.

### How much does a square foot of 1/4 inch steel plate weigh?

About 10.2 lb for carbon steel. The same plate in aluminum 6061 weighs about 3.5 lb.

### How much lighter is aluminum than steel?

Aluminum is roughly one third the weight of steel for the same size: about 0.0975 lb/in³ for 6061 against 0.2836 lb/in³ for carbon steel.

### Does stainless steel weigh more than carbon steel?

Slightly. 304 and 316 stainless run about 0.289 lb/in³ (8.0 g/cm³) against about 0.284 lb/in³ (7.85 g/cm³) for carbon steel, so stainless is about 2 percent heavier for the same size.

### How accurate is this calculator?

It uses typical published densities and exact geometry, except square tube, which ignores the corner radius. Real stock varies with alloy and mill tolerance, so the actual weight is usually within a few percent.

### Can I calculate sheet metal weight by gauge?

Yes. Look up the gauge's decimal thickness in the sheet metal gauge chart, then enter it as plate thickness. Gauge numbers differ between steel, stainless and aluminum, so use the right column.
