Process & DFM

Getting Design Help

What OpenSpindle's design assistance covers and how to request it.

Tom PetriniCo-founder, OpenSpindle
Published 3 min read
STL · SKETCH · PHOTODESIGN HELP8045°Ø16 H7STEP + PDF DRAWINGSKETCH OR MESH, RESOLVED INTO A QUOTABLE FILE SET

The short answer

If you have an idea for a part but no CAD file, or an STL / mesh file that your shop needs as a STEP, OpenSpindle can help turn that into a design our manufacturing network can quote and build. This guide explains what the service covers and how to request it. Full content coming in phase 2.

When to ask for design help

The two most common reasons are: you have an idea but no CAD file, or you have a mesh file (STL / OBJ / 3MF) and your shop needs solid CAD geometry (STEP / Parasolid). We can also help turn a hand sketch, a photograph of an existing part, or a measured sample into a drawing. This section will expand in a later update.

What the output looks like

A quotable file set: a solid CAD model in a neutral format (STEP), a dimensioned PDF drawing covering critical tolerances and finishes, and a short description of the design intent. More detail coming in phase 2.

Requesting design help

Reply to your RFQ confirmation email and ask for design help. We will reach out with scope and a short brief to confirm what you need. More guidance coming in phase 2.

Last reviewed by Tom Petrini

Let us quote your next part.

Upload your CAD or drawing and tell us your budget. We source it across our global network of partner shops and come back with your best-match quote, typically within about 24 hours.

  • Free quote in about 24 hours
  • No minimum order
  • No account needed to start
Add your CAD filesUp to 30 files per quote
Upload files & get a free quote

STEP · STL · IGES · DWG · DXF · SLDPRT · and more

No CAD file? Describe your project instead