OpenSpindle · Manufacturing guides

The Brief

Short, specific guides on getting parts made: quality documentation, material choices, design for manufacturing, and how sourcing works.

Featured · Materials

5052 vs 6061 Aluminum: Which Alloy for Your Part

TPTom Petrini·Nov 12, 2026·6 min
Sourcing

The Future of Manufacturing May Be a Network of Small Shops, Not One Giant Factory

How distributed manufacturing, independent machine shops, AI and digital sourcing platforms are changing access to custom manufacturing.

BPBryan Petro·Sep 20, 2026·7 min
SUPPLIER SCORECARDQ3QUALITY35%DELIVERY30%RESPONSE15%COST20%CORRECTIVEACTIONDUE 30 SEPA SCORE THAT TRIGGERS NOTHING IS BOOKKEEPING
Sourcing

How to Build a Supplier Scorecard

Four metrics carry almost all the signal. How to define on-time delivery, weight the score and run the review, plus what the program costs to run.

BPBryan Petro·Sep 19, 2026·10 min
OUTINGROWN INTO THE SURFACEABOUT HALF EACH WAYANODIZEOUTAPPLIED ON TOPALL OF IT OUTWARDPOWDERORIGINAL SURFACE
Process & DFM

Anodizing vs Powder Coating

One grows out of the aluminum, the other sits on top of it. How each behaves on dimensions, threads, color and wear, with a selector by application.

TPTom Petrini·Sep 18, 2026·7 min
Materials

Aluminum vs Steel for Machined Parts

Steel is three times stiffer, aluminum three times lighter, and the machined part is usually cheaper in aluminum. How to decide on stiffness, fatigue and cost.

TPTom Petrini·Sep 17, 2026·8 min
STEPGEOMETRY ONLYHOLE? THREAD? FIT?+REV BM5x0.8-6HØ12 H7Ra 1.6PDFSEND BOTH: THE MODEL SHOWS SHAPE, THE DRAWING SHOWS INTENT
Process & DFM

What CAD Files to Send for a Manufacturing Quote

STEP, STL, native CAD, DXF or a PDF drawing? What each file format carries and loses, what to send for each process, and the file mistakes that stall quotes.

TPTom Petrini·Sep 16, 2026·10 min
20080Ø28Ø16 H7GENERAL TOL ISO 2768-mTOLERANCE ONLY WHAT FUNCTIONS
Process & DFM

How to Specify Tolerances Without Overpaying

Set a general tolerance, tighten only the features that function, use fits and GD&T where a ± falls short, and put tolerances in an RFQ the right way.

TPTom Petrini·Sep 16, 2026·11 min
REQUEST FOR QUOTEFILESMODEL + DRAWINGMATERIAL6061-T6QUANTITY25, ALSO 100TOLERANCESTD, 2 BORES H7THREADS4X M5x0.8FINISHCLEAR ANODIZECERTSMATERIAL CERTNEED BYSHOP GUESSESEVERY BLANK IS PRICED AS AN ASSUMPTION
Process & DFM

How to Write an RFQ That Gets Accurate Quotes

What a manufacturing RFQ has to tell a shop, what gets left out most often, and a checklist for sending custom part requests that come back priced right.

TPTom Petrini·Sep 16, 2026·9 min
2.12.23.13.2NON SPECIFICTESTED ON PRODUCTIONHEATSPECIFIC INSPECTION
Quality & Compliance

Material Certifications: Which Type Proves What

EN 10204 defines four inspection document types. What each one proves, which ones cover your actual heat of material, and how to ask for the right one.

TPTom Petrini·Sep 16, 2026·8 min
FULL THREADHOLDS THE SCREWDRILL DEPTHTAP CHAMFERINCOMPLETETHREAD DEPTH IS NOT HOLE DEPTH
Process & DFM

Tapped Holes: Design, Callouts and Quoting

How tapped holes are made, how deep to thread them, how to call them out on a drawing, and how to put them in an RFQ so the quote comes back right.

TPTom Petrini·Sep 16, 2026·9 min
TAPPEDTHREAD IN THE PARENTWEARS WITH EVERY ASSEMBLYHELICAL INSERTSTEEL COIL IN AN OVERSIZE TAPSPREADS LOAD, REPLACEABLE
Process & DFM

Threaded Inserts: Types, Sizing, Callouts and Quoting

When a threaded insert or clinch nut beats a tapped hole, how each type changes the hole, how to call them out, and how to add them to an RFQ correctly.

TPTom Petrini·Sep 16, 2026·10 min
1FORM 1PART NUMBERACCOUNTABILITY2FORM 2PRODUCTACCOUNTABILITY3FORM 3CHARACTERISTICACCOUNTABILITY12345EVERY CHARACTERISTIC
Quality & Compliance

The AS9102 FAIR Form Explained

What each AS9102 form accounts for, when a first article inspection report is triggered, what changed in Rev C, and the mistakes that get a FAIR rejected.

TPTom Petrini·Sep 15, 2026·8 min
Materials

Delrin vs Nylon: Which to Machine

Acetal holds tolerance, nylon absorbs moisture and moves. Stiffness, wear, water absorption and machinability compared, with a selector by application.

TPTom Petrini·Sep 14, 2026·7 min

Let us quote your next part.

Upload your CAD or drawing and tell us your budget. We source it across our global network of partner shops and come back with your best-match quote, typically within about 24 hours.

  • Free quote in about 24 hours
  • No minimum order
  • No account needed to start
Add your CAD filesUp to 30 files per quote
Upload files & get a free quote

STEP · STL · IGES · DWG · DXF · SLDPRT · and more

No CAD file? Describe your project instead